Electrical Conduit Drilling · Fulton County
Electrical Conduit Drilling in Alpharetta, GA
New fiber, power, water, sewer and gas lines reach buildings in Alpharetta underground, and the straight line from the main to the meter runs under something expensive almost every time. Directional drilling puts the line under all of it from two small pits and leaves the pavement and the landscaping as they were.
Serving Alpharetta · Fulton County
Davis Underground Solutions, Inc.
Electrical conduit drilling and every other boring method, with locates, bore plan and permits handled. More about Davis Underground Solutions →
Electrical Conduit Drilling in Alpharetta: what gets installed
PVC and HDPE electrical conduit bored under pavement for primary feeds, secondary services, site lighting and EV charging circuits.
Alpharetta's office parks and new subdivisions along GA 400 keep a steady run of conduit, fiber and services under roads that were two-lane not long ago; rock is often within reach of a shallow bore here.
How a bore in Alpharetta is done
The job in Alpharetta starts before the rig arrives: the Georgia 811 ticket, a walk of the alignment, and a bore plan that threads the marked utilities and anything the locate cannot see. The pilot hole is drilled with a steerable head and tracked from the surface rod by rod, then reamed to size, and the product is pulled back through in one pass. Rock, when it shows up, changes the bit and the pace, not the method.
Hiring a electrical conduit drilling contractor in Alpharetta
The crew that drills Alpharetta should have put lines under this ground before; the rock, the roots and the permit agencies here are not the same as the next county over. Davis Underground Solutions, Inc. owns its rigs and crews, quotes from a site walk, and the estimate costs nothing.
The full write-up for the county is on the electrical conduit drilling page for Fulton County.
Estimates are free. Call now: (678) 264-3333.
Questions about electrical conduit drilling in Alpharetta
Depth under a parking lot?+
Code minimum for the voltage and Georgia Power's standard for its feeds, commonly 24 to 48 inches; deeper under public streets.
Depth under a parking lot?+
Code minimum for the voltage and Georgia Power's standard for its feeds, commonly 24 to 48 inches; deeper under public streets.
Will the bore damage my driveway or landscaping in Alpharetta?+
No. The surface between the two pits is never opened; the pits are small, the drilling fluid is contained with a vac truck, and the pits are backfilled and restored when the line is in.
Other drilling and boring services in Alpharetta
Directional Drilling Alpharetta
Horizontal directional drilling (HDD): a steered bore between two small pits that puts conduit, pipe and cable under roads, driveways, parking lots and landscaping with no open trench.
Horizontal Drilling Alpharetta
Horizontal drilling for any line that has to cross something it cannot cut through: a street, a slab, a canal, a stand of trees. Entry pit, exit pit, nothing opened in between.
Directional Boring Alpharetta
Directional boring is the small-rig end of HDD: short, shallow bores for service lines, sleeves and conduit on residential and light-commercial lots.
Underground Drilling Alpharetta
Underground drilling for new utilities where the surface is spoken for: tracked, steered bores placed under whatever is already built on top.
Fiber Optic Cable Drilling Alpharetta
Fiber duct and drop conduit installed by directional drill for carriers, co-ops, campuses and developments: long shots along the right-of-way, short shots to the building.
Underground Conduit Drilling Alpharetta
Single ducts and multi-duct bundles pulled through one reamed bore: communications, power, controls and spares placed together under the obstacle.
Structured Cable Drilling Alpharetta
Conduit between buildings for structured cabling, campus networks, security and controls, bored under courtyards, drives and parking rather than cut across them.
Utility Drilling Alpharetta
Utility drilling for water, sewer, gas, power and telecom owners: permitted road crossings, mains under live streets, services to the meter.
Communications Drilling Alpharetta
Communications conduit and cable placed by directional drill: telecom, cable TV, cell-site backhaul and private networks, under roads and lots.
Missile Boring Alpharetta
Missile boring (pneumatic piercing) drives a steel mole through the soil for short, straight, shallow runs under a driveway or sidewalk: the quickest way to sleeve a lawn or a walk.
Auger Boring and Drilling Alpharetta
Cased auger bores for road, highway and railroad crossings and for gravity sewer that has to hold an exact grade: a straight steel casing jacked from a pit.
Sewer, Water and Drain Lines Alpharetta
New water services and mains, sewer force mains and laterals, and storm drains installed under roads, driveways and yards without trenching them open.
Alpharetta ZIP codes served
30004, 30005, 30009, 30022, 30023
Electrical Conduit Drilling in nearby Fulton County communities
- Electrical Conduit Drilling College Park
- Electrical Conduit Drilling East Point
- Electrical Conduit Drilling Fairburn
- Electrical Conduit Drilling Hapeville
- Electrical Conduit Drilling Johns Creek
- Electrical Conduit Drilling Milton
- Electrical Conduit Drilling Mountain Park
- Electrical Conduit Drilling Palmetto
- Electrical Conduit Drilling Roswell
- Electrical Conduit Drilling Sandy Springs
- Electrical Conduit Drilling Union City
- Electrical Conduit Drilling Atlanta