Underground Drilling · Fulton County
Underground Drilling in Johns Creek, GA
New fiber, power, water, sewer and gas lines reach buildings in Johns Creek underground, and the straight line from the main to the meter runs under something expensive almost every time. Directional drilling puts the line under all of it from two small pits and leaves the pavement and the landscaping as they were.
Serving Johns Creek · Fulton County
Davis Underground Solutions, Inc.
Underground drilling and every other boring method, with locates, bore plan and permits handled. More about Davis Underground Solutions →
Underground Drilling in Johns Creek: what gets installed
Underground drilling for new utilities where the surface is spoken for: tracked, steered bores placed under whatever is already built on top.
Johns Creek is subdivisions, schools and office campuses on rolling Piedmont ground; most bores are services and campus conduit under new pavement.
How a bore in Johns Creek is done
A bore in Johns Creek is planned backward from the product: the bend the pipe can take, the cover the permit requires under the street or the creek, and the ground along the path set the entry angle and the length. One or more reaming passes open the pilot hole; the pipe or conduit is pulled back on the last pass with a swivel so it does not twist.
Hiring a underground drilling contractor in Johns Creek
Price in Johns Creek comes down to the length of the bore, the size and material of the product, what it crosses, the cover the permit demands and whether there is rock. Send a sketch or the utility's drawing through the form on this page and Davis Underground Solutions, Inc. replies within 24 hours; or call (678) 264-3333 now, since estimates are free.
The full write-up for the county is on the underground drilling page for Fulton County.
Estimates are free. Call now: (678) 264-3333.
Questions about underground drilling in Johns Creek
How deep can a bore go in Atlanta?+
Deep enough to clear existing utilities and meet the permit; 4 to 15 feet on utility work, deeper for interstate, rail and MARTA crossings.
How deep can a bore go in Atlanta?+
Deep enough to clear existing utilities and meet the permit; 4 to 15 feet on utility work, deeper for interstate, rail and MARTA crossings.
How soon can a bore in Johns Creek be scheduled?+
Small residential and commercial bores are usually on the calendar within a week or two of the site walk; crossings follow the permit. Georgia 811 needs three business days' notice before the pits are dug, and the contractor files it.
Other drilling and boring services in Johns Creek
Directional Drilling Johns Creek
Horizontal directional drilling (HDD): a steered bore between two small pits that puts conduit, pipe and cable under roads, driveways, parking lots and landscaping with no open trench.
Horizontal Drilling Johns Creek
Horizontal drilling for any line that has to cross something it cannot cut through: a street, a slab, a canal, a stand of trees. Entry pit, exit pit, nothing opened in between.
Directional Boring Johns Creek
Directional boring is the small-rig end of HDD: short, shallow bores for service lines, sleeves and conduit on residential and light-commercial lots.
Fiber Optic Cable Drilling Johns Creek
Fiber duct and drop conduit installed by directional drill for carriers, co-ops, campuses and developments: long shots along the right-of-way, short shots to the building.
Electrical Conduit Drilling Johns Creek
PVC and HDPE electrical conduit bored under pavement for primary feeds, secondary services, site lighting and EV charging circuits.
Underground Conduit Drilling Johns Creek
Single ducts and multi-duct bundles pulled through one reamed bore: communications, power, controls and spares placed together under the obstacle.
Structured Cable Drilling Johns Creek
Conduit between buildings for structured cabling, campus networks, security and controls, bored under courtyards, drives and parking rather than cut across them.
Utility Drilling Johns Creek
Utility drilling for water, sewer, gas, power and telecom owners: permitted road crossings, mains under live streets, services to the meter.
Communications Drilling Johns Creek
Communications conduit and cable placed by directional drill: telecom, cable TV, cell-site backhaul and private networks, under roads and lots.
Missile Boring Johns Creek
Missile boring (pneumatic piercing) drives a steel mole through the soil for short, straight, shallow runs under a driveway or sidewalk: the quickest way to sleeve a lawn or a walk.
Auger Boring and Drilling Johns Creek
Cased auger bores for road, highway and railroad crossings and for gravity sewer that has to hold an exact grade: a straight steel casing jacked from a pit.
Sewer, Water and Drain Lines Johns Creek
New water services and mains, sewer force mains and laterals, and storm drains installed under roads, driveways and yards without trenching them open.
Underground Drilling in nearby Fulton County communities
- Underground Drilling Fairburn
- Underground Drilling Hapeville
- Underground Drilling Milton
- Underground Drilling Mountain Park
- Underground Drilling Palmetto
- Underground Drilling Roswell
- Underground Drilling Sandy Springs
- Underground Drilling Union City
- Underground Drilling Atlanta
- Underground Drilling Alpharetta
- Underground Drilling Chattahoochee Hills
- Underground Drilling College Park